XIANYUAlloy · Changzhou
Technical notes

Questions engineers actually ask

Each note takes one question, answers it, and says where the answer stops being true. Nothing here is a sales page — if a grade is the wrong choice for your job, the note says so.

2026-11-10

Why does a Type K thermocouple read low between 250 °C and 550 °C?

The effect is called short-range ordering, or the K-state. It lives in the positive leg, it is reversible, and…

2026-11-10

ANSI MC96.1 or IEC 60584-3 colour codes: which should a purchase order specify?

A colour code only identifies a thermocouple if you know which standard wrote it. The same green-and-white pai…

2026-11-04

Put these eight fields on a Type K bare wire RFQ, or the quotes will not compare

Three quotes for the same wire can differ by half and none of them is wrong. What usually happened is that the…

2026-11-04

A material certificate is not a thermoelectric test, and buyers keep treating it as one

A thermocouple wire order usually arrives with a mill test certificate, and purchasing signs it off as evidenc…

2026-11-04

Bare wire, insulated wire or MI cable: pick by what happens after delivery

These three are often compared as if they were grades of the same product. They are not. One is a component yo…

2026-11-04

What diameter tolerance is realistic on 0.05 mm nickel wire?

±0.002 mm. That is the number a mill holds on 0.05 mm nickel wire on a normal commercial basis, and it is alre…

2026-11-02

6J12 is the tighter grade and 6J13 is the wider window

Both are copper-manganese-nickel resistance alloys and both are sold as manganin, but they are not interchange…

2026-11-02

No constantan grade holds resistance better than the others

There is no constantan grade that is more stable than the rest, because 6J40 and CuNi44 are one alloy written …

2026-10-27

A Type K reading 8 °C low is a loop fault, not a junction fault

Eight degrees sits in an awkward band. It is too large to be a new thermocouple's tolerance — Type K standard …

2026-10-27

A 0.4 % shift after soldering is almost never the manganin

Four thousand ppm of resistance change is what 0.4 % means, and manganin's own temperature coefficient is only…

2026-10-26

Type K or Type E at 900 °C in vacuum: Type E holds, until the ceiling matters

In a 900 °C vacuum furnace, Type E drifts less than Type K — not because it is more sensitive, but because it …

2026-10-26

Manganin or constantan at 60 °C ambient: pick on thermal EMF, not on TCR

At 60 °C ambient, use manganin for DC current sensing. Both alloys have a low temperature coefficient, so the …

2026-10-26

A 100 A EV charger shunt is manganin, and it is a blade, not a wire

The element is manganin, almost always the CuMn12Ni grade sold as 6J12. It is chosen for two properties: a tem…

Send the specification — diameter, grade, temper, quantity.

We come back with a confirmed lead time and the documentation we can issue for the shipment. 100 g sample at cost; orders from 1 kg.

Request a quotation Order a 100 g sample