Ni200
Nickel 200 Wire
Nickel 200 wire to UNS N02200 / GB N6, drawn 0.025–6.00 mm in soft, half-hard or hard temper. 1 kg minimum, 3–7 days, MTC with every lot.
Datasheets
Twelve grades, each with its own sheet
Composition, resistivity, service limits, available diameters and the questions engineers ask before specifying. Pick the designation your drawing cites.
Ni201
Nickel 201 Wire
Low-carbon Nickel 201 wire (UNS N02201 / GB N4), 0.025–6.00 mm. Carbon held at 0.02 % for service above 315 °C. 1 kg minimum, MTC included.
Monel 400
Monel 400 Wire
Monel 400 nickel-copper wire to UNS N04400, 0.10–6.00 mm. Seawater, hydrofluoric acid and alkaline service. 1 kg minimum, 3–7 days.
6J40
Constantan Wire (6J40 / Cu55Ni45)
Constantan (Cu55Ni45, GB 6J40) resistance wire, 0.05–6.00 mm. Near-flat resistivity versus temperature; negative leg of type E, J and T thermocouples. From 1 kg.
6J8
Manganin Wire 6J8
Manganin 6J8 (Cu-Mn-Ni) resistance wire, 0.05–6.00 mm. Low temperature coefficient, small thermal EMF against copper. From 1 kg, 3–7 days.
6J12
Manganin Wire 6J12
Manganin 6J12 (CuMn12Ni) precision resistance wire, 0.05–6.00 mm. The reference material for shunts and standard resistors. 1 kg minimum.
6J13
Manganin Wire 6J13
Manganin 6J13 wire, 0.05–6.00 mm, for shunts, meters and BMS current sensing. 1 kg minimum, 3–7 days, measured Ω/m on every spool label.
CuNi44
CuNi44 Resistance Wire
CuNi44 / NC050 copper-nickel resistance wire, 0.05–6.00 mm. Stable resistivity, good corrosion resistance, solderable. From 1 kg.
Type K
Type K Thermocouple Wire
Type K thermocouple wire, positive NiCr and negative NiSi legs drawn from the same melt and shipped as a matched pair. 0.018–6.00 mm, from 1 kg, 3–7 days.
Type E
Type E Thermocouple Wire
Type E thermocouple wire, NiCr positive and constantan negative leg, 0.10–6.00 mm, matched pairs, class 1 available. From 1 kg.
Type J
Type J Thermocouple Wire
Type J thermocouple wire, iron positive and constantan negative leg, 0.10–6.00 mm. Matched pairs, class 1 available, from 1 kg.
Type T
Type T Thermocouple Wire
Type T thermocouple wire, copper positive and constantan negative leg, 0.10–6.00 mm. Stable at low temperature, matched pairs, from 1 kg.
Send the specification — diameter, grade, temper, quantity.
We come back with a confirmed lead time and the documentation we can issue for the shipment. 100 g sample at cost; orders from 1 kg.
Request a quotation Order a 100 g sample